What Happens After a Fire Risk Assessment?
Your report is the starting point for action. Here is how to understand the findings, prioritise improvements and keep a useful record of the work you complete.
What should you do with your fire risk assessment report?
Read the full report, identify any matters requiring immediate attention, and turn the recommendations into a managed action plan. Each action should have a responsible person, an appropriate completion date and a way to confirm the work has been done.
A fire risk assessment identifies risks and the precautions needed to manage them. Receiving the document does not, by itself, resolve the issues it identifies.
For businesses, landlords and property managers, the practical task is to move from a list of findings to safer premises and working fire safety arrangements.
1. Read more than the headline risk rating
Start with the assessment’s description of the premises and its use. Check that the report reflects the building, occupancy and management arrangements, and raise any factual errors with the assessor.
Then read the findings and action plan together. A headline rating gives context, but the individual findings explain what needs to change and why.
Look for any areas that were inaccessible, documents that were unavailable or matters that need further investigation. An area outside the assessment’s scope should not be treated as having been checked and found satisfactory.
Ask for an explanation where needed. If a recommendation is unclear, contact the assessor before commissioning work. Understanding the intended outcome helps you request suitable quotations.
2. Act on urgent risks first
Follow the priorities and timescales in your own report. Different assessors may use different rating systems, so do not assume that a colour or label has the same meaning in every assessment.
If a finding identifies an immediate threat to life, take prompt protective action and obtain competent advice. Depending on the circumstances, it may be necessary to restrict use of an affected area until suitable precautions are in place.
Do not wait for an ordinary maintenance appointment or the next annual review to address a serious safety concern. If there is a fire or immediate emergency, call 999.
Read the required outcome
Establish the problem to be resolved, the people affected and the precautions needed. A recommendation may require specialist assessment before a repair can be specified.
Discuss practical obstacles early
If access, specialist parts or building ownership complicate the work, seek advice promptly about suitable arrangements while the permanent solution is organised.
3. Give each action an owner and a completion date
Keep one action register so that findings do not become scattered across emails, contractor quotes and staff notes. You can use a spreadsheet, maintenance system or the report’s action-plan section.
For each item, record:
- The report reference and location of the finding.
- The recommended action and its priority.
- The person coordinating completion.
- The target date, based on the report and any competent advice.
- Any agreed temporary measures and how they will be checked.
- The current status and evidence needed to close the item.
For example, “door closer needs attention” gives little help to a contractor. A better record identifies the exact door, refers to the assessor’s finding and records who will arrange a competent inspection or repair.
A booking or purchase order shows that work is being arranged. It does not show that the problem has been resolved.
4. Use competent people for specialist tasks
Some actions involve everyday management, such as removing inappropriate storage from an escape route or updating staff instructions. Other actions require specialist knowledge.
Fire door repairs, alarm alterations, emergency lighting work and investigations into fire separation may need suitably competent contractors. Give them the relevant findings and ask them to confirm their proposed scope and completion evidence.
If the recommendation calls for further investigation, establish what that investigation finds before assuming that a particular repair will solve the issue.
Where you lease premises or share a building, coordinate with the landlord, managing agent or other responsible persons. Establish who controls the affected area and how the work will be managed. A shared responsibility needs a clear arrangement for action.
Does having the report mean the premises are compliant?
No. A completed assessment records the findings and informs the precautions required. It does not automatically demonstrate that every necessary measure is in place or that later changes have been assessed.
Appointing an assessor does not transfer the responsible person’s duties. The person or organisation responsible for the premises must ensure the assessment is suitable, necessary measures are implemented and arrangements remain effective.
5. Check completion and keep useful evidence
Before marking an action complete, check that the work addresses the finding and that appropriate handover information has been supplied. Where specialist judgement is needed, arrange suitable verification rather than relying on appearance alone.
Keep evidence that is relevant to the action. This may include contractor reports, test results, commissioning records, photographs, updated procedures or records of staff instruction.
Record the completion date and who checked it. Keep the original assessment and a clear history of subsequent actions; avoid silently deleting findings from the report.
Photographs can help show a visible improvement, but they do not replace technical evidence where performance needs to be tested or verified.
6. Continue routine fire safety management
Closing the action plan is not the end of fire safety management. Put suitable arrangements in place for checks, maintenance, staff information and reporting new defects.
The arrangements should suit the premises and the precautions provided. Relevant tasks may include keeping escape routes clear, checking doors, arranging alarm and emergency-lighting testing, and maintaining suitable emergency procedures.
Follow the assessment, applicable guidance and equipment instructions when setting the checks and their frequency. Record faults and follow them through to completion.
If the premises change hands or a new responsible person takes over, relevant fire safety information needs to be passed on. Clear records make that handover more useful.
7. Review the assessment when circumstances change
Keep your assessment under regular review and revise it when necessary. Do not wait for a planned review date if a change could affect the findings.
Triggers can include alterations to the layout, a change in use or occupancy, new equipment or processes, changes to evacuation arrangements, a fire or near miss, or significant faults in existing precautions.
Ask whether completed work or newly discovered information changes the assessment. Some actions can be recorded as completed; other changes may require a further review or investigation.
There is no single statutory renewal interval for every building. Read our guide to how often a fire risk assessment should be reviewed.
Fire risk assessment action-plan FAQs
How long do I have to complete the recommendations?
Use the priorities and timescales in your report, taking prompt advice where anything is unclear. There is no universal period that makes every finding safe to leave unresolved. Any formal enforcement notice must be handled according to its requirements.
Can I keep trading while actions are outstanding?
That depends on the risks and the precautions in place. A report’s existence does not establish that continued use is safe. Seek prompt competent advice where a finding could affect occupants’ safety; restrictions may be needed in serious cases.
Does the assessor carry out all the remedial work?
Do not assume that assessment and remedial work are included in the same appointment. Check the agreed scope. Specialist repairs, servicing and technical testing may need separate contractors.
Should the assessor return after the work?
A further visit may be appropriate where changes are significant, risks are complex or specialist verification is needed. Discuss the findings and completed work to establish what follow-up is suitable.
What if I disagree with a recommendation?
Ask the assessor to explain the finding, its basis and the outcome required. Provide any relevant evidence they may not have seen. Obtain further competent advice where necessary, while continuing to manage the risk.
Useful reading
Need a clear assessment and practical recommendations?
Firebugged provides fire risk assessments across South Wales, carried out by Paul Williams, a Level 4 qualified assessor with more than 26 years of fire safety experience. Contact Paul to discuss your premises and request a quotation.


